Degree Of Deviation Research Articles

Methodology for assessing the level of development and efficiency of the functioning of the traffic management system, taking into account the environmental factor

The scientific article presents a methodology for assessing the level of development and efficiency of traffic management systems, taking into account environmental factors. The order and algorithms for all calculations to assess the level of effectiveness for road traffic management systems of motor transport, while taking into account the impact of environmental factors, are provided. The methodology for assessing the current state of the traffic management system relies on the degree of deviation of each individual indicator from its target value. The resulting value of the composite indicator for the system’s condition is then compared to its standard value, and an estimated overall state for the system is determined. According to some indicators, there has been an increase in emissions of toxic substances in the city's streets and roads, which are assessed as “poor”. To improve the state of the environment, an immediate set of organizational and technical measures has been proposed for the rational development of the traffic management system.

The individual variability of the dentato-rubro-thalamic tract in the planning of stereotactic operations in patients with tremor

Background. Stereotactic operations on the ventral‑intermediate nucleus of the thalamus (Vim) and the posterior subthalamic area (PSA) are used for the surgical treatment of tremor. Since these structures are invisible in standard magnetic resonance imaging (MRI) regimes, indirect stereotactic guidance is mainly used during operations. MRI tractography allows taking into account the individual variability of the target structures for tremor, visualizing the target directly, but this technique has not yet entered the routine practice of preparing operations.Aim. The aim of the work is to study the variability of the position of the dentato‑rubro‑thalamic tract (DRT), determined according to MRI tractography data, in relation to the main reference points for indirect stereotactic guidance, as well as to the visible landmarks on MRI in FGATIR mode, to assess the validity of the currently used methods of preparing operations in patients with tremor.Materials and methods. Probabilistic MRI tractography of DRT based on the HARDY protocol was performed in 34 patients. Additionally, 3D T1 tomograms were obtained with axial slices with an isotropic voxel size equal to 1 mm, as well as FLAIR sagittal slices with a thickness of 1.12 and a pitch of 0.56 mm. Eleven patients additionally underwent a series of MRI sections according to the FGATIR program with a thickness of 1 mm, without an intersectional gap.Results. A significant variability of the DRT position has been established both in the coordinate system of the anterior and posterior commissures, and in relation to standard targets for indirect stereotactic guidance. In addition, a visible interhemispheric asymmetry of the position of the tracts was revealed. The smallest degree of deviation from the tract was noted for the trajectories of deep brain stimulation electrodes implanted in the caudal zona incerta (cZI) at the level of the maximum diameter of the red nuclei. A high degree of correspondence between the tract and the target zone of prelemniscal radiations (Raprl) was also established on tomograms in the FGATIR mode.Conclusions. The standard target points for the indirect targeting of Vim targets and the cerebello‑thalamic tract in PSA give a deviation of more than 2 mm from DRT in almost half of patients. During the use of cZI as a standard target for indirect guidance in the treatment of tremor, the DRT is located at the zone of stereotactic impact at the level of the 2nd or 3rd contact of the electrode in 76.5 % of cases. FGATIR mode allows visualizing the structure of Raprl, with stereotactic guidance on which the effect on the DRT can be achieved in 86.4 % of cases.

A novel deviation measurement for scheduled intelligent transportation system via comparative spatial-temporal path networks

Transit managers can use Intelligent Transportation System technologies to access large amounts of data to monitor network status. However, the presentation of the data lacks structural information. Existing single-network description technologies are ineffective in representing the temporal and spatial characteristics simultaneously. Therefore, there is a need for complementary methods to address these deficiencies. To address these limitations, this paper proposes an approach that combines Network Snapshots and Temporal Paths for the scheduled system. A dual information network is constructed to assess the degree of operational deviation considering the planning tasks. To validate the effectiveness, discussions are conducted through a modified cosine similarity calculation on theoretical analysis, delay level description, and the ability to identify abnormal dates. Compared to some state-of-the-art methods, the proposed method achieves an average Spearman delay correlation of 0.85 and a relative distance of 3.47. Furthermore, case analyses are invested in regions of China's Mainland, Europe, and the United States, investigating both the overall and sub-regional network fluctuations. To represent the impact of network fluctuations in sub-regions, a response loss value was developed. The times that are prone to fluctuations are also discussed through the classification of time series data. The research can offer a novel approach to system monitoring, providing a research direction that utilizes individual data combined to represent macroscopic states. Our code will be released at https://github.com/daozhong/STPN.git.

Extension of finite particle method simulating thermal-viscoelastic flow and fluid–rigid body interactional process in weakly compressible smoothed particle hydrodynamics scheme

In computational non-Newtonian fluid dynamics, heat transfer has obvious effects on motions of viscoelastic fluids, mechanical mechanism of elasticity, and flow regimes. This study suggests an extended numerical scheme of smoothed particle hydrodynamics and finite particle method within density smoothing (SPH_DSFPM), which involves the discretization of smoothed particle hydrodynamics (SPH) and finite particle method (FPM) within density smoothing (DS) in the weakly compressible flow scheme. A corrected particle shifting technique is incorporated to eliminate tensile instability and inhomogeneity near solid boundaries. A corrected dynamic solid coupled boundary is introduced to deal with casting molding within high-pressure operations, which has a good compatibility between virtual particle method and repulsive force model. Numerical results show that the present scheme has the nearly lower relative error (0.5%) than conventional SPH (2.6%) in the case of evolutionary thermal-viscoelastic Poiseuille flow and heat effects have active influences on velocity, pressure variations for viscoelastic fluid flow around periodic circular cylinders. Three different printing modes of moving printers significantly generate into differentiated forming regimes through high-pressure extrusion. Adaptive particle distributions possess robust flow evolutions, by which the shocked jets can be tracked well and the sinking velocities of wedge entering into solutions can be numerically probed well considering different cuspidal biting angles. In the case of macroscopic fluid–rigid body interactions, the statistical degree of deviation on probed forces with experiments is relatively 4.35% and that is 12.5% for SPH. The proposed numerical scheme has a good performance on improved accuracy, convergence, and stability for simulating transient thermal-viscoelastic flows.

Grammatical Type of Stepwise Transposition of Nominal Word Form ‘ryadom’ [near] into Subclass of Manner Adverbs

The relevance of the study is determined by the necessity of a systematic   analysis of the linguistic mechanism of transposition, which produces a vast range of peripheral and hybrid formations in speech. The investigation of degrees of adverbial transposition of nouns has revealed certain regularities in the interaction of semantic and grammatical aspects within the structure of adverbialized word forms. Using the example of the word form ‘ryadom’ [near], different stages of adverbialization of instrumental case forms have been demonstrated, indicating the degree of deviation from nouns and convergence with adverbs. By employing the methodology of oppositional analysis (with a scale of transitivity) and indexing, it has been established that within the periphery of the adverbial class, there are proper grammatical (functional) adverbs that do not disrupt the semantic identity of the original lexemes and represent a distinct (adverbial) type of usage. The analysis of the syncretic structure of the peripheral adverb ‘ryadom’ [near] has shown that it exhibits 4% correspondence to the differential features of the core noun ‘ryadom’ (‘row’ in the instrumental case) and 64% correspondence to the differential features of the core adverb ‘ryadom’ [near]. These findings can be utilized in further exploration of intercategorical transposition and syncretism of linguistic units, as well as in the development of a transpositional grammar for the Russian.

Temperature difference and systemic risk: Evidence from LASSO-VAR-DY based on China's pan-financial market.

Climate change-induced pan-financial market and the contagion of systemic financial risks are becoming important issues in the financial sector. The paper measures the temperature difference in terms of the degree and direction of deviation of the actual temperature relative to the average temperature of the same historical period. Based on the high-dimensional time-series variable LASSO-VAR-DY framework, we construct a pan-financial market volatility correlation network consisting of 112 Chinese listed companies in banking, insurance, securities, real estate, traditional energy, and new energy, use eigenvector centrality to measure the systematic risk of each firm, and then empirically test the effect of temperature difference on systematic risk under pan-financial market scenario. The results of the study show that (ⅰ) There is a significant difference among the systemic risk of financial sectors such as banking, insurance, and securities in the financial market pan-financial market scenario and the systemic risk when the financial market pan-financial market is not taken into account;(ⅱ) Higher temperature significantly exacerbates systemic financial risk, while colder temperature significantly mitigates systemic risk, but both have an asymmetric effect on systemic risk, and there is sectoral heterogeneity.(ⅲ) From the dynamic evolutionary characteristics, there are significant differences in the response of systemic financial risk to positive and negative temperature shocks;(iv) The results of the systemic risk variance decomposition indicate that the temperature change contributes more to the variance of systemic risk in the banking and securities sectors in pan-financial market;(ⅴ) The contagion source of financial systemic risk shows an obvious path of leaping and changing characteristics, and the contagion source of systemic risk (source of impact) shows the evolution law of "bank → real estate → new energy → temperature difference," which means that the temperature difference has become the contagion source of systemic financial risk. This study provides a reference for preventing and resolving systemic risks under pan-financial market scenario and provides a basis for improving the current macroprudential regulatory framework.

[A cross-sectional survey of delivery room transitional care management for very/extremely preterm infants in 24 hospitals in Shenzhen City].

To investigate the current status of delivery room transitional care management for very/extremely preterm infants in Shenzhen City. A cross-sectional survey was conducted in November 2022, involving 24 tertiary hospitals participating in the Shenzhen Neonatal Data Network. The survey assessed the implementation of transitional care management in the delivery room, including prenatal preparation, delivery room resuscitation, and post-resuscitation management in the neonatal intensive care unit. Very/extremely preterm infants were divided into four groups based on gestational age: <26 weeks, 26-28+6 weeks, 29-30+6 weeks, and 31-31+6 weeks. Descriptive analysis was performed on the results. A total of 140 very/extremely preterm infants were included, with 10 cases in the <26 weeks group, 45 cases in the 26-28+6 weeks group, 49 cases in the 29-30+6 weeks group, and 36 cases in the 31-31+6 weeks group. Among these infants, 99 (70.7%) received prenatal counseling, predominantly provided by obstetricians (79.8%). The main personnel involved in resuscitation during delivery were midwives (96.4%) and neonatal resident physicians (62.1%). Delayed cord clamping was performed in 52 cases (37.1%), with an average delay time of (45±17) seconds. Postnatal radiant warmer was used in 137 cases (97.9%) for thermoregulation. Positive pressure ventilation was required in 110 cases (78.6%), with 67 cases (60.9%) using T-piece resuscitators and 42 cases (38.2%) using a blended oxygen device. Blood oxygen saturation was monitored during resuscitation in 119 cases (85.0%). The median time from initiating transitional care measures to closing the incubator door was 87 minutes. The implementation of delivery room transitional care management for very/extremely preterm infants in the hospitals participating in the Shenzhen Neonatal Data Network shows varying degrees of deviation from the corresponding expert consensus in China. It is necessary to bridge the gap through continuous quality improvement and multicenter collaboration to improve the quality of the transitional care management and outcomes in very/extremely preterm infants.

Lifespan development of thalamic nuclei and characterizing thalamic nuclei abnormalities in schizophrenia using normative modeling.

Thalamic abnormalities have been repeatedly implicated in the pathophysiology of schizophrenia and other neurodevelopmental disorders. Uncovering the etiology of thalamic abnormalities and how they may contribute to illness phenotypes faces at least two obstacles. First, the typical developmental trajectories of thalamic nuclei and their association with cognition across the lifespan are largely unknown. Second, modest effect sizes indicate marked individual differences and pose a significant challenge to personalized medicine. To address these knowledge gaps, we characterized the development of thalamic nuclei volumes using normative models generated from the Human Connectome Project Lifespan datasets (5-100+ years), then applied them to an independent clinical cohort to determine the frequency of thalamic volume deviations in people with schizophrenia (17-61 years). Normative models revealed diverse non-linear age effects across the lifespan. Association nuclei exhibited negative age effects during youth but stabilized in adulthood until turning negative again with older age. Sensorimotor nuclei volumes remained relatively stable through youth and adulthood until also turning negative with older age. Up to 18% of individuals with schizophrenia exhibited abnormally small (i.e., below the 5th centile) mediodorsal and pulvinar volumes, and the degree of deviation, but not raw volumes, correlated with the severity of cognitive impairment. While case-control differences are robust, only a minority of patients demonstrate unusually small thalamic nuclei volumes. Normative modeling enables the identification of these individuals, which is a necessary step toward precision medicine.

The Effects of Nasal Septal Deviation on Anterior Skull Base Parameters

Abstract Introduction Functional endoscopic sinus surgery and endoscopic skull base surgery are frequently performed surgeries today. Nasal septal deviation is a common finding and can affect the surgical area. Therefore, it is important to examine the effect of this deviation on other anatomical structures. Objectıve The aim of the present study was to determine whether there is a relationship between the degree of nasal septal deviation and anterior skull base structures using computed tomography (CT). Methods A total of 312 patients (aged 18 to 65 years old) whose paranasal sinus CT images were available were included in the study. Measurements were obtained on images retrieved from Picture Archiving and Communication System (PACS) and Horos image archive systems in the bone window in the coronal and axial plane. Results The mean age of 312 patients was 33.00 years old (standard deviation [SD] 11.22 years). The presence of septal deviation was not associated with changes in olfactory fossa (OF) depths, Keros degrees, and the angle between the lateral lamella and the cribriform lamella. However, OF depths and Keros degrees on the deviated side of the septum were found to change at a significant level (p &lt; 0.05). No significant association was observed between the degree of septal deviation and cribriform lamella-lateral lamella angle. Conclusion The study showed significantly increased OF depth and Keros degree on the deviated side of the nasal septum. Performing CT scans before endoscopic sinus surgery and endoscopic skull base surgery is important to increase the chances of a successful surgical outcome and to reduce complications.

Three-dimensional-based native alignment phenotype classification system: Description for use in planning for deformities during total knee arthroplasty

IntroductionTotal knee arthroplasty (TKA) is a complex surgical procedure that traditionally relies on two-dimensional radiographs for pre-operative planning. These radiographs may not capture the intricate details of individual knee anatomy, potentially limiting the precision of surgical interventions. With advancements in imaging technology, there is an opportunity to refine TKA outcomes. This study introduces the Native Alignment Phenotype classification system that is based on pre-operative 3-dimensional computed tomography (CT) scans, aiming to provide a more detailed understanding of knee deformities and their influence on characterizing knee osteoarthritis and planning for TKA procedures. MethodsThere were 1406 pre-operative non-weight-bearing CT scans analyzed by a single surgeon experienced with robotically-assisted total knee arthroplasties. These scans were converted into three-dimensional models, focusing on the coronal and sagittal planes. Intraoperatively, the robotic system was used to capture native coronal and sagittal deformities for each patient. These values were captured with the patient's leg held in a non-stress, extension pose. A new classification system, ‘The Native Alignment Phenotype’, was developed to categorize the specific differences between individual knees. ResultsThere were four primary knee malalignments identified: varus deformity; valgus deformity; and two deformities in the sagittal plane. These malalignments were further categorized based on the degrees of deviation, creating groups with 5° coronal and sagittal ranges. A total of 77 phenotypic alignment patterns were found based on the analyzed cohort. In the coronal plane, varus HKA deformity between 6 and 10° was the most common, with 36.9% of the cases, followed by varus HKA alignment, which was between 0 and 5°, representing 34.3% of the cases. In the sagittal plane, neutral and flexion contracture deformities between 0 and 5° were the most common, with 32.6% of the cases, followed by a fixed flexion contracture alignment, which was between 6 and 10°, representing 28.7% of the cases. When combining coronal and sagittal planes, the most common alignment was the varus between 0 and 5° with a flexion contracture between 0 and 5° (12.5% of cases), closely followed by the varus between 6 and 10° with a flexion contracture between 6 and 10° (12.4% of cases). ConclusionThe Native Alignment Phenotype classification system offers a nuanced understanding of knee deformities based on three-dimensional (CT scan) assessments, potentially leading to improved surgical outcomes in TKA. By leveraging the detailed data from the CT scans, this system provides a more comprehensive view of the knee's anatomy, emphasizing the importance of individualized, data-driven approaches in knee surgery.

A new class of hexadentate thioether-containing ligands and their complexes with nickel(II)

A new series of hexadentate thioether-containing ligands was designed. Five nickel(II) dicationic pseudo-octahedral complexes synthesised with them revealed different degrees of deviation from ideal geometry. The electronic absorption spectra confirm the formation of high-spin octahedral [NiN4S2]2+chromophores with a large covalency typical for Ni(II) thioether complexes. DFT calculations help assign the chelating agent transitions, and support the Ni(II) high-spin ground state assignments, while suggesting that the SOMOs have mainly ligand character. The electrochemical behaviour of the complexes is consistent with irreversible n = 1 redox processes around −1.0 V, formally assignable to the Ni(II)/Ni(I) couple. Ligand reduction and large current augmentation due to catalytic H2production are also observed in this region.

A Novel Communication Time-Delay Cooperative Control Method with Switching Event-Triggered Strategy

A novel communication time-delay classification-based method is designed for nonlinear multiagent systems with the finite-time prescribed performance function. The time-delay phenomenon for communication channels between agents is discussed. Then, an improved time-delay classification method is proposed to broaden the standard of classification mechanism by considering the degree of deviation and relative variation of neighbor agents, rather than classifying the delay time into large time-delay and small time-delay. Based on this, the unified Lyapunov-Krasovskii functional and the finite-time performance function are used to solve the large time-delay phenomenon and ensure that the error is within the preset boundary, respectively. Furthermore, a modified switching event-triggered strategy is put forward to reduce the transmission burden, which considers the impact of tracking error to adjust the threshold condition in real-time. Additionally, all signals of the closed-loop systems are bounded. Eventually, two simulation examples verify the validity of the control strategy.

Adjunctive dorsal spanning plate fixation for challenging distal radius injuries

BackgroundDistal radius fractures with severely osteoporotic bone or articular comminution can provide challenges to fixation with traditional volar locked plating alone. The purpose of this study was to evaluate the clinical, radiographic, and patient reported outcomes of patients undergoing distal radius fixation with volar locked plating and adjunctive dorsal bridge plating. MethodsWe retrospectively identified 16 patients with distal radius fractures who underwent our preferred surgical technique for fixation. Patients underwent volar locked plate fixation as well as dorsal bridge fixation at time of surgery. Seven patients were indicated for severe articular comminution with volar rim fragmentation (44%), three patients were revised for nonunion after previous volar locked late fixation (19%), and six patients had severely osteoporotic bone with articular comminution (38%). Two patients (13%) sustained AO/OTA 23-A3 distal radius fracture, two patients (13%) had a 23-B3 fracture, two patients (13%) had a 23-C2 fracture and ten patients (63%) had a 23-C3 fracture. ResultsThe average patient age was 51.8 years ± 20.6. Patients were followed for an average of 12.2±6.3 months. The dorsal bridge plate was removed at an average of 11.1±2.4 weeks. The average post-operative radial inclination was 18.9±2.4°, radial height 12.4 mm ± 2.6 mm, and volar tilt 7.1±1.9°. There were no cases of deep or superficial infection. After dorsal bridge plate removal, patients demonstrated an average wrist extension of 55.3±9.5°, flexion 54.4±12.8°, radial deviation 15.7±3.2°, 25.2±3.9 degrees of ulnar deviation. ConclusionDistal radius fractures in the setting of severely osteoporotic bone, salvage procedures, articular comminution, volar rim fractures, and revision surgery present uniquely difficult surgical challenges. Volar locked plating with adjunctive dorsal bridge plating can be used with good short- and long-term results.

Exploring the Beam Squint Effects on Reflectarray Performance: A Comprehensive Analysis of the Specular and Scattered Reflection of the Unit Cell.

In this article, the phenomena of beam deviation in reflectarray is discussed. The radiation pattern of the unit cell, which plays a vital role in shaping the beam of the reflectarray, is analyzed by considering undesired specular and scattered reflections. These unwanted reflections adversely affect the pattern of the single unit cell, thereby reducing the overall performance of the reflectarray. To conduct our investigations, three cases of reflectarray-i.e., (i) a center-fed with broadside beam (Case-I), (ii) a center-fed with the beam at 30° (Case-II), and (iii) off-center-fed with the beam at 30° reciprocal to feed position with reference to the broadside direction (Case-III)-are simulated. Different degrees of beam deviation are analyzed in each reflectarray by assessing the radiation pattern of a single element. The simulation results shows that maximum of 0°, 3.4°, and 0.54° beam squint across the bandwidth found in Case-I, Case-II, and Case-III, respectively; this leads to aperture efficiencies of 31.2%, 11.9%, and 31.2%, respectively. The significance of specular reflections is further confirmed by half (left half and right half) aperture analysis of Case-II. This involves simulating the half-plane aperture illuminated by horn antenna, resulting in a distinct beam angle at the same frequency. However, deviations of -4.71 to +4.1 for the left half aperture and -1.82 to +1.1 for the right half aperture are noticed. Although the analysis specifically focuses on the three cases of the reflectarray, the proposed methodology is applicable to any type of reflectarray. The study presented in this work provides an important insight into the practical aspects of reflectarray operation, particularly in terms of quantifying undesirable effects that are normally overlooked in the design of this class of arrays. To achieve a good performance, a new design of the dielectric loaded horn feed is proposed. This design approach is both simple and applicable to any reflectarray, with the added benefit of maintaining a low profile for the RA. Moreover, this work holds significant potential for remote sensing satellite systems as beam deviation can adversely impact data collection accuracy and compromise observation precision, resulting in distorted images, reduced data quality, and overall hindrance to the system's performance in capturing reliable information.

Biophysical and structural characterization of tetramethrin serum protein complex and its toxicological implications.

Tetramethrin (TMT) is a commonly used insecticide and has a carcinogenic and neurodegenerative effect on humans. The binding mechanism and toxicological implications of TMT to human serum albumin (HSA) were examined in this study employing a combination of biophysical and computational methods indicating moderate binding affinity and potential hepato and renal toxicity. Fluorescence quenching experiments showed that TMT binds to HSA with a moderate affinity, and the binding process was spontaneous and predominantly enthalpy-driven. Circular dichroism spectroscopy revealed that TMT binding did not induce any significant conformational changes in HSA, resulting in no changes in its alpha-helix content. The binding site and modalities of TMT interactions with HSA as computed by molecular docking and molecular dynamics simulations revealed that it binds to Sudlow site II of HSA via hydrophobic interactions through its dimethylcyclopropane carboxylate methyl propanyl group. The structural dynamics of TMT induce proper fit into the binding site creating increased and stabilizing interactions. Additionally, molecular mechanics-Poisson Boltzmann surface area calculations also indicated that non-polar and van der Waals were found to be the major contributors to the high binding free energy of the complex. Quantum mechanics (QM) revealed the conformational energies of the binding confirmation and the degree of deviation from the global minimum energy conformation of TMT. The results of this study provide a comprehensive understanding of the binding mechanism of TMT with HSA, which is important for evaluating the toxicity of this insecticide in humans.

INFLUENCE OF PULSE ELECTROMAGNETIC RADIATION ON PERFORMANCE OF ELECTRIC RADIO PRODUCTS

The subject matter is the processes of analysis of the occurrence of reversible and irreversible failures of semiconductor devices under conditions of exposure to electromagnetic radiation. It is shown that the influence of pulsed electromagnetic radiation is accompanied by the emergence of currents in the conductive elements of products and the emergence of their internal fields. The mechanisms for the occurrence of instabilities of natural oscillations of semiconductor components of electrical and radio products, caused by their interaction with flows of charged particles, have been determined. The presence of instabilities of this kind has a significant impact on the spectral (operating) characteristics of electrical radio products. The results obtained in the work make it possible to assess the degree of influence of pulsed electromagnetic radiation on the operating (volt-ampere) characteristics of electrical radio products. The aim is a model of the mechanisms of the emergence and development of instabilities of natural oscillations of semiconductor structures, components of electrical radio products (communication equipment), in the presence of currents and voltages induced by pulsed electromagnetic radiation. The implementation of such a model is due to the possibility of transforming the energy of a flow of charged particles induced by external electromagnetic radiation into the energy of natural vibrations of a semiconductor structure, taking into account the properties of the structure itself (size, concentration of free carriers, permeability). The transformation of the energy of currents induced by electromagnetic radiation into natural vibrations of a semiconductor structure is determined by two effects (transition or Cherenkov radiation) depending on the location of the structure relative to the direction of the currents. The objectives are: the main electromagnetic effects affecting performance of electrical radio products (ERI) under exposure conditions external pulsed radiation and also indicates characteristic changes ERI parameters that determine their functional purpose, which are a consequence of these effects. The methods used are the method of successive approximations over a small parameter, which allows one to determine the spectrum of natural oscillations of a semiconductor device and the mode of their amplification (instability). The following results are obtained. The results of studies characterizing the malfunction of electrical radio products under conditions of exposure to third-party electromagnetic radiation are presented, as well as the main parameters characterizing the electromagnetic resistance of electronic devices to the effects of pulsed currents and voltages. The characteristic types of malfunctions of semiconductor devices (SCD), components of electronic components, in areas of irreversible and reversible failures, as well as the levels of intensities and currents of electric and magnetic fields affecting the SPD, separating the areas of reversible and irreversible failures, are given. Using the energy approach, a physical model of the occurrence of one of the types of reversible failures of the semiconductor element base (the appearance of S-shaped sections of currentvoltage characteristics) has been developed. This physical model makes it possible to determine the criteria for the electromagnetic resistance of a number of semiconductor devices to the effects of external pulsed radiation and also to obtain calculated ratios for assessing the degree of deviation of the operating characteristics of the PPP from the norm. Conclusion. Development of design relationships that determine the modes of amplification (generation) of oscillations of electrical radio products, making it possible to determine the degree of distortion of their current-voltage characteristics (reversible failures) and complete loss of performance (irreversible failures) depending on the parameters of external electromagnetic radiation. The results obtained in the work can be used in the development of amplifiers, generators and frequency converters operating in the millimeter and submillimeter range that are resistant to external electromagnetic radiation. Quantitative estimates of the criterion for reversible failures (instability increments) show that the amount of radiation energy lies within the sensitivity of modern submillimeter radiation receivers and is the cause of failures.

Autonomous predictive maintenance of quadrotor UAV with multi-actuator degradation

Abstract With the wide application of quadrotor unmanned aerial vehicles (UAVs), the requirements for their safety and reliability are becoming increasingly stringent. In this paper, based on the feedback of airframe performance health perception information and the predictive function control strategy, the autonomous maintenance of a quadrotor UAV with multi-actuator degradation is realised. Autonomous maintenance architecture is constructed by the predictive maintenance (PdM) idea and the Laguerre function model predictive pontrol (LF-MPC) strategy. Using the two-stage Kalman filter (TSKF) method, based on the established UAV degradation model, the aircraft state and actuator degradation state are predicted simultaneously. For the predictive perception of system health, on the one hand, the system health degree (HD) based on Mahalanobis distance is defined by the degree of airframe state deviation from the expected state, and then the failure threshold of the UAV is obtained. On the other hand, according to the degradation state of each actuator, a comprehensive degradation variable fused with different weight coefficients of multiple actuators degradation is used to obtain the probability density function (PDF) of remaining useful life (RUL) prediction. For the autonomous maintenance of system health, the LF-MPC weight matrixes are adjusted adaptively in real-time based on the HD evaluation, to achieve a compromise balance between UAV performance and control effect, and greatly extend the working time of UAV. Simulation results verified the effectiveness of the proposed method.

G-code generation for deposition of continuous glass fibers on curved surfaces using material extrusion-based 3D printing

Improving the mechanical properties of 3D printed parts produced through a material extrusion-based 3D printer with continuous fibers (carbon, glass, and aramid) has been a focal point for numerous researchers. Given the layered nature of additive manufacturing (AM) processes, wherein parts are built up layer by layer, most studies involve the deposition of continuous fibers onto a 2D surface. Cases involving curved surfaces have employed robots with high degrees of freedom. This research introduces a method for depositing continuous glass fibers onto curved surfaces, implemented on a cost-effective material extrusion-based 3D printer. The presented approach involves G-code modification, the incorporation of a rotating axis for the nozzle, and the application of computer-aided design and manufacturing techniques. Experimental results affirm the efficacy of this method for depositing continuous fibers onto curved surfaces. The developed technique enables the production of free-form composite shells with a thermoplastic matrix and continuous fiber reinforcement. Lastly, through 3D scanning of the printed sample and subsequent comparison with the 3D model, the degree of surface form deviation and tolerance is determined. The maximum deviation identified in this study is 0.1 mm, a tolerable amount considering the inherent characteristics and behaviors of thermoplastic materials (shrinkage and warpage) during production processes.

Integrated Deep Ultraviolet Doublet Metalens for Projection Imaging

Metalenses, with their unique modulation of light, are in great demand for many potential applications. As a proof-of-principle demonstration, we focus on designing SiO2 metalenses that operate in the deep ultraviolet region, specifically around 193 nm. Based on the deep ultraviolet metalens proposed in this paper, an integrated deep ultraviolet doublet metalens is further offered. When the incident light is a plane wave with a wavelength of 193 nm, the integrated doublet metalens can reduce the beam size by a factor of 4:1, and the emitted light is flat. The integrated doublet metalens can project the reticle image proportionally, making the projection image clear. The integrated doublet metalens has the best imaging effect at the propagation distance of 2 μm and can tolerate ±3 degrees of incident angle deviation. Our findings establish general and systematic strategies to guide the design of traditional optical lens arrays with excellent integrated doublet metalenses and pave the way for enhanced optical performance in the application of large-relative-aperture deep ultraviolet detection, deep ultraviolet microscope systems, laser beam combining systems, deep ultraviolet lithography systems, etc.

Comparison of Masimo Total Hemoglobin SpHb® continuous non-invasive hemoglobin monitoring device with laboratory complete blood count measurement using venous sample: Protocol for an observational substudy of the Pregnancy Risk and Infant Surveillance and Measurement Alliance Maternal and Newborn Health (PRISMA MNH) study

Background The Masimo Total Hemoglobin SpHb® is a continuous and non-invasive handheld device to measure hemoglobin levels. Previous research has found that SpHb is able to accurately detect hemoglobin levels in adult patients with a similar degree of bias and standard deviation to point-of-care invasive method measurements. Generally, limited clinical evidence, lack of validation of Masimo at higher than and lower than hemoglobin threshold values, and scientific consensus supporting the use of Masimo for accurate hemoglobin testing for the diagnosis of anemia during pregnancy calls for further research. Methods and analysis The proposed prospective cohort will be nested within the ongoing Pregnancy Risk and Infant Surveillance and Measurement Alliance (PRISMA) Maternal and Newborn Health (MNH) study. Three study sites (located in Zambia, Kenya, and Pakistan) will participate and collect hemoglobin data at five time points (&lt;20 weeks, 20 weeks, 28 weeks, 36 weeks’ gestation, and six weeks postpartum). We will measure hemoglobin using a venous blood sample via hematology auto-analyzer complete blood count (gold standard) and the non-invasive device. The primary objective is to assess agreement between Masimo total hemoglobin and complete blood count and on a continuous scale using Intraclass Correlation Coefficient and Bland-Altman Analysis. The second objective is to assess agreement between the two measures on a binary scale using Positive Percentage Agreement and Negative Percentage Agreement, Cohen’s Kappa, and McNemar Test. On an ordinal scale, agreement will be measured using Weighted Cohen’s Kappa and Harrel’s Concordance Index. Lastly, we will assess factors that might affect the accuracy of Masimo total hemoglobin using linear mixed models. Conclusions The primary aim of this study is to assess the validity of the non-invasive Masimo device compared to the gold standard method of invasive hemoglobin measurements during pregnancy and postpartum periods for the diagnosis of anemia.